Core monitoring and signal parameters
Channel configuration: Equipped with 4 input channels, it can flexibly configure and connect proximity probes, speed sensors, accelerometers and other devices to meet the monitoring needs of various key mechanical parameters such as vibration and displacement. Some adaptation scenarios can also receive two key phase pulse signals and support switching between different tracking filters.
Signal specifications: The input signal is compatible with multiple sensor types and supports an input range of 4mA to 20mA; The output covers voltage signals from 0VDC to 10VDC and power supply signals from 4mA to 20mA circuits, with a measurement resolution of 0.3662 μ A/bit and a measurement accuracy of ± 1% of the full range. It can accurately feedback the operating status of the equipment.
Electrical performance parameters
Power supply and power consumption: The mainstream power supply specification is 24VDC, and some scenarios are compatible with 24.9V power supply; There are different specifications for power consumption, with a typical power consumption of 7.7 watts and a low-power version of 5W/1.09VA, corresponding to a working current of up to 45.5mA, suitable for long-term continuous operation in industrial scenarios.
Impedance characteristics: The input impedance is 2k Ω, the output impedance is 100 Ω, and it has an input/output electrical isolation design, which can effectively avoid electrical noise interference in industrial sites and ensure signal transmission stability. It also has short-circuit protection, reverse polarity protection, and ground fault protection functions to enhance operational safety.
Physical and installation parameters
Size and weight: There may be slight differences in the labeling of different channels. Common sizes include 9.50 inches x 0.96 inches x 9.52 inches (height x width x depth) and other specifications. The weight range is between 0.91kg-2kg, and the transportation weight is about 2kg. Overall, it is compact and easy to integrate.
Installation method: Supports DIN rail installation and 19 inch EIA rack installation, can be easily embedded into control cabinets or equipment chassis, compatible with 3500 series rack systems, and can be seamlessly integrated into existing control systems.