Power supply and power consumption parameters
The working voltage is 24V DC, the sensor power supply is -24Vdc, and the maximum current is 40mA.
The typical power consumption is stable at 8.0 watts, and the energy consumption is suitable for industrial continuous operation scenarios.
Measurement and accuracy parameters
The speed measurement range covers 0-100000 rpm, with an accuracy of ± 0.1% and a resolution of 0.01 rpm.
The input signal range is+10.0V to -24.0V, with a response time of less than 1 millisecond, and can quickly capture abnormal speed.
The resolution of the 4-20mA recorder output is 0.3662 μ A per bit, with an error of ± 0.25% at room temperature and ± 0.7% over the full temperature range.
Input/output parameters
Input compatible with multiple eddy current sensors and magnetic sensors such as 3300 XL and 7200 series, with strong compatibility.
Equipped with a single pole double throw relay, the maximum switching power of the contacts is 120W DC and 600VA AC, with a maximum switching current of 5A and a minimum switching current of 100mA at 5VDC. The contact life can reach 100000 times.
Physical and environmental parameters
There are differences in the dimensions marked on some channels. One common size group is 100mm × 70mm × 40mm, with a weight of 0.5kg; another version is marked as 222mm × 178mm × 76mm, with a weight of 2.2kg. The actual supply shall prevail.
The working temperature range is from 40 ° C to+85 ° C, which can adapt to harsh industrial temperature environments and harsh working conditions in multiple industries.
Communication and core characteristic parameters
Supports Ethernet, RS232/485 and other interfaces, compatible with Ethernet/IP, Profinet and Modbus protocols, and can interface with DCS, SCADA and other systems.
Equipped with redundant speed measurement design, supporting 2 out of 2 or 2 out of 3 voting systems, equipped with self diagnostic function, and can also configure parameters through 3500 rack configuration software, easy to install and maintain, widely used for safety monitoring of equipment such as turbines and compressors.